Tracing Connections

Connection piece (straight) for connecting or transferring tracing cables. Supplied with 1 x

shrinkage insulation end seal kit.

Dimensions	26,5-32 mm x 115-130 mm
Class	IP68/5 Bar
T marking	T85ºC
Operating temp.	-40ºC tot +125ºC
Tracing index	PTI250

---

Connection unit for MTM & MTW

Connection piece (straight) for connecting or transferring tracing cables. Supplied with 1 x

shrinkage insulation end seal kit.

Dimensions	26,5-32 mm x 115-130 mm
Class	IP68/5 Bar
T marking	T85ºC
Operating temp.	-40ºC tot +125ºC
Tracing index	PTI250

---

Dividing unit for MTR, MTGH and MTHW

Connection piece (T) for connecting or splitting tracing cables. Supplied including 2x Shrinkage insulation end seal kits

Dimensions (mm)	36 x 137 x 118 mm
Class	IP54-IP65
Operating temp.	-40ºC tot +125ºC

---

Dividing unit for MTM & MTW

Connection piece (T) for connecting or splitting tracing cables. Supplied including 2x shrinkage insulation end seal kits.

Dimensions (mm)	36 x 137 x 118 mm
Class	IP54-IP65
Operating temp.	-40ºC tot +125ºC

---

Cable gel connection piece

A universal connection piece that is also suitable for each cable type. Highly reliable and can be installed without advanced tools.

 

 

 

 

 

 

 

Connection                         Increasing cable length   

 

 

 

 

 

 

Y-connection                         End seal

---

Shrinkage insulation connection kit

For connecting an connection cable, connecting

cables to each other, or repairing damaged cables.

Kit contains all needed components, including shrink tubing and connectors. Use: 1 kit for each cable.

---

Shrinkage insulation end seal kit

For sealing a cable end.

Use: 1 Shrink tube per cable end.

---

Connection box IP 55

Connection box IP55 including DIN-rail connection clips. For connecting or splitting more than onetracing cable.

IP-Class	IP55
Dimensions	125 x 125 x 75 mm

---

Cable gland (20 mm) for MTM, MTW, MTR and MTGH

For feeding an MTM, MTW, MTR and MTGH tracing cable through into an connection box. One gland for each cable.

 

Cable gland (25 mm) for MTHW

For feeding an MTHW tracing cable through into an connection box. One gland for each cable.

---

¾” Brass cable conductor/pipe connection for MTW

Brass cable conductor for watertight sealing of the water pipe.

 

For applying a MAGNUM Trace Water in a water pipe with a minimum diameter of 22 mm.

---

Glass fibre tape

Special adhesive glass fibre tape

for installing a tracing cable on piping.

Breadth tape	25 mm
Length tape	33 meters
Installation	3 windings for each 30 cm

---

Alutape

Especially for winding around plastic piping when a tracing cable is needed. This tape gives a higher heat outlet for plastic piping.

Breadth	50 mm
Length	22,5 meters

---

Support bracket for gutter-Set of 3 pieces

These support brackets support the cable and keep it in position in the gutter or drain. In gutters where 2 cables are needed, these brackets make sure the cables stay at the correct distance.

---

Gutter clips-Set of 10 pieces

With these gutter clips you can fix the cables in the eaves in an easy manner. Needed: 1 clip per 0.5 meter tracing.

---

Warning sticker- per set of 5 pieces

To be applied as a warning in places where 

tracinghas been installed.